Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 255)

Brocade Mobility RFS7000-GR Controller System Reference Guide 241
53-1001944-01
DHCP server settings
5
1. Select Services > DHCP Server from the main menu tree.
2. Click the Add button at the bottom of the screen.
3. Enter the Pool Name from which IP addresses can be issued to client requests on this
interface.
4. Provide the Domain name as appropriate for the interface using the pool.
5. Enter the NetBios Node used with this particular pool. The NetBios Node could have one of the
following types:
• A b-broadcast (broadcast node) uses broadcasting to query nodes on the network for the
owner of a NetBIOS name.
• A p-peer (peer-to-peer node) uses directed calls to communicate with a known NetBIOS
name server, such as a Windows Internet Name Service (WINS) server, for the IP address
of a NetBIOS machine.
• An m-mixed is a mixed node that uses broadcasted queries to find a node, and failing that,
queries a known p-node name server for the address.
• An h-hybrid is a combination of two or all of the nodes mentioned above.
6. Enter the name of the boot file used for this pool within the Boot File parameter.