Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 171)

Brocade Mobility RFS7000-GR Controller System Reference Guide 157
53-1001944-01
Viewing associated MU details
4
NOTE
The Brocade Mobility RFS7000-GR Controller supports 8192 MUs.
To view MU statistics details:
1. Select Network > Mobile Units from the main menu tree.
2. Click the Statistics tab.
3. Select the Last 30s checkbox to display MU statistics gathered over the last 30 seconds. This
option is helpful for assessing MU performance trends in real-time.
4. Select the Last HR checkbox to display MU statistics gathered over the last hour. This option is
helpful for assessing performance trends over a measurable period.
5. Refer to following details as displayed within the MU Statistics table:
Radio Index Displays a numerical identifier used to associate a particular Radio with a set of
statistics. The Index is helpful for distinguishing the radio from other radios with a
similar configuration.
AP Type Displays the type of Access Port that the MU is connected through either an Access
Port or an Adaptive AP.
MAC Address Displays the Hardware or Media Access Control (MAC) address for the MU. The
MAC address is hard coded at the factory and cannot be modified.
MAC Name Displays the MAC name associated with each MU’s MAC Address. The MAC name
is a user created name used to identify individual mobile unit MAC addresses with
a user friendly name.
WLAN Displays the name of the WLAN the MU is currently associated with. Use this
information to determine if the MU/WLAN placement best suits the intended
operation and MU coverage area.