Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 53)

Brocade Mobility RFS7000-GR Controller System Reference Guide 39
53-1001944-01
Chapter
3
Controller Information
In this chapter
This chapter describes the Switch main menu information used to configure the switch. This
chapter consists of the following sections:
• Viewing the switch interface
• Viewing switch port information
• Viewing switch configurations
• Viewing switch firmware information
• Switch file management
• Configuring automatic updates
• Viewing the switch alarm log
• Viewing switch licenses
• How to use the filter option
Viewing the switch interface
The Switch Configuration tab provides high-level system, switch name and address information
accessible from one location. Use this information to assess whether the current firmware version
is the most recent and if the number of licenses available is correct to support the number of radio
devices deployed. The values displayed within the screen can be defined in numerous additional
locations throughout the switch applet.
The switch screen displays two tabs supporting the following configuration activities:
• “Setting the switch country code” on page 40
• Viewing switch statistics
NOTE
When the switch’s configuration is successfully updated (using the Web UI), the effected screen is
closed without informing the user their change was successful. However, if an error were to occur,
the error displays within the effected screen’s Status field and the screen remains displayed. With
file transfer operations, the transfer screen remains open during the transfer and remains open
upon completion (with status displayed within the Status field).