Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 137
Brocade Mobility RFS7000-GR Controller System Reference Guide
123
53-1001944-01
Viewing and configuring switch WLANs
4
6. .Select the NAC tab to configure NAC support.
7. Refer to the Server field and define the following credentials for a primary and secondary NAC
server.
NAC Server Address
Enter the IP address of the primary and secondary NAC server.
NAC Server Port
Enter the TCP/IP port number for the primary and secondary server. The default
port is 1812.
NAC Shared Secret
Provide a shared secret (password) for user credential authentication with the
primary or secondary NAC server.
Server Timeout
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
NAC server.
Server Retries
Enter a value between 1 and 100 to indicate the number of times the switch
attempts to reach the primary or secondary server before giving up.