Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 150)

136 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing and configuring switch WLANs
4
Viewing WLAN switch statistics
The Switch Statistics screen displays the sum of all WLAN statistics. The Switch Statistics screen is
optimal for displaying a snapshot of overall WLAN traffic on your switch.
To view detailed statistics for a WLAN:
1. Select a Network > Wireless LANs from the main menu tree.
2. Click the Statistics tab.
3. Select a WLAN from the table displayed in the Statistics screen and click the Switch Statistics
button.
4. Refer to the Packet Rates field to review the number of packets both transmitted (Tx) and
received (Rx) at data rates from 1.0 to 54.0 Mbps. If a large number of packets are sent and
received at a slower data rate, then perhaps the switch is not adequately positioned or
configured to support the MUs within that WLAN.
5. Refer to the Retry Counts field to review the number packets requiring retransmission from the
switch.
6. Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the switch.
7. Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
8. Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.