Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 369)

Brocade Mobility RFS7000-GR Controller System Reference Guide 355
53-1001944-01
Configuring firewalls and access control lists
6
5. To create a new role configure the following information:
Sequence Number Enter a sequence number to be associated with each role. Sequence numbers
determine the order that role are applied. Roles with lower sequence numbers are
applied before those with higher sequence numbers. Sequence numbers are
assigned when a role is created and cannot be edited.
Role Name Enter a name for each role. The role name is configured when the role is created
and cannot be edited.
AP Location Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
•
Exact: The role will only be applied to APs with the exact location string
specified in the role
•
Contains: The role will be applied to APs whose location contains the location
string specified in the role
•
Not Contains: The role will be applied to APs whose location does not contain
the location string specified in the role
•
Any: The role will be applied to any AP Locations
ESSID Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
•
Exact: The role will only be applied when the exact ESSID string specified in
the role
•
Contains: The role will be applied when the ESSID contains the string
specified in the role
•
Not Contains: The role will be applied when the ESSID does not contain the
string specified in the role
•
Any: The role will be applied to any ESSIDs
Group Name Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
•
Exact: The role will only be applied when the exact RADIUS Group Name string
specified in the role
•
Contains: The role will be applied whenthe RADIUS Group Name contains the
string specified in the role
•
Not Contains: The role will be applied to when the RADIUS Group Name does
not contain the string specified in the role
•
Any: The role will be applied to any RADIUS Group Name
MU MAC Address Configure the MU MAC Address filters, if any, applied to each role. The MU MAC
Address filter can be set to apply the role to any MU MAC Address or a specific MU
MAC Address or a MU MAC Mask.
Authentication Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
•
Equals: The role will only be applied when the Authentication type matches
the exact Authentication method specified in the role
•
Not Equals: The role will only be applied when the Authentication type does
not match the exact Authentication method specified in the role
•
Any: The role will be applied to any Authentication type
Encryption Select an Encryption filter, if any, to apply to the role.
Available Encryption filters are:
•
Equals: The role will only be applied when the Encryption type matches the
exact Encryption method specified in the role
•
Not Equals: The role will only be applied when the Encryption type does not
match the exact Encryption method specified in the role
•
Any: The role will be applied to any Encryption type