Editing an adaptive ap wlan – Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 346
332
Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring firewalls and access control lists
6
4. The Attach AAP WLAN tab contains the following read-only information:
5. Select an interface and click on Edit to modify the WLAN Index, IP ACL and MAC ACL values. For
more information see,
6. Select an interface and click the Delete button to delete the interface configuration from the
switch.
7. Click on Add button to add an physical or VLAN interface to the switch. For more information,
see
Editing an adaptive AP WLAN
To Edit an AAP WLANs page:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
4. On the Attach AAP WLAN tab select a WLAN and click the Edit button::
WLAN Index
The WLAN Index displays the list of attached WLANs with ACLs.
IP ACL
Displays the IP ACL configured for the WLAN interface in the inbound/outbound
direction.
Direction
Displays the MAC ACL configured for the WLAN interface in the inbound/outbound
direction.
WLAN Index
Enter the WLAN Index to attch the WLAN with ACLs.