Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 542)

528 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring a Wireless IDS Deployment
C
7. Select the Enable to checkbox globally enable unauthorized AP detection on the switch. Click
Apply.
NOTE
If Brocade devices are being deployed, you can optionally enable MU Assisted Scanning, which
leverages Brocade client extensions on Brocade devices to provide additional detection.
8. From the switch menu tree select Security > Access Point Detection.
9. Select the Unapproved APs (AP Reported) tab.
Detected APs are listed in this table.