Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 416)

402 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring IPSec VPN
6
1. Select Security > IPSec VPN from the main menu tree.
2. Click the IPSec SAs tab.
3. Refer to the following security association data:
4. Use the page navigation facility (found on top of the table next to the Show Filtering Options
link) to view the list of security associations.
The switch can display a maximum of 600 security associations. To enable a search through
the list, the Security > IPSec VPN screen provides a page navigation facility. Up to 30 security
associations display per page.
Index Displays the numerical (if defined) ID for the security association. Use the index to
differentiate the index from others with similar configurations.
Local Peer Displays the name of the local peer at the near side of the VPN connection.
Remote Peer Displays the name of the remote peer at the far side of the VPN connection.
ESP SPI In SPI specified in the Encapsulating Security Payload (ESP) inbound header.
ESP SPI Out SPI specified in the Encapsulating Security Payload (ESP) outbound header.
AH SPI In Displays the inbound Authentication Header (AH).
AH SPI Out Displays the outbound Authentication Header (AH).
Cipher Algorithm Displays the algorithm used with the ESP cipher.
MAC Algorithm Displays the algorithm used with the security association.