Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 41)

Brocade Mobility RFS7000-GR Controller System Reference Guide 27
53-1001944-01
Software overview
1
IEEE 802.1x Yes Full support IEEE 802.1x
authentication ether with a fully
functional integrated RADIUS
server built into our RF Switches
and Access Points or an external
RADIUS server such as Microsoft
IAS, Microsoft NPS, Cisco Secure
ACS, Free RADIUS and Juniper
Steel Belted RADIUS (to name a
few).
When using the integrated
RADIUS server we support the
following EAP methods:
•
EAP-TLS
•
EAP-GTC (PEAPv1)
•
EAP-MSCHAPv2 (PEAPv0)
•
EAP-TTLS (MD5, PAP,
MSCHAPv2)
When using an external RADIUS
server the EAP type is
transparent to the WLAN
infrastructure allowing any
standard EAP method to be
supported.
The IEEE 802.1x standard is fully
supported on the following
Switch Platforms:
•
Brocade Mobility
RFS7000-GR Controller
The IEEE 802.1x standard is fully
supported on the following AP
Platforms:
•
Brocade Mobility
7131N-FGR Access Point
Access Point
IEEE 802.3u Yes The IEEE 802.3u (100BASE-T)
standard is fully supported on
the following Switch Platforms:
•
Brocade Mobility
RFS7000-GR Controller
The IEEE 802.3u (100BASE-T)
standard is fully supported on
the following AP Platforms:
•
Brocade Mobility
7131N-FGR Access Point
Access Point
IEEE Standard Supported Notes