Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 208)

194 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
5. The Radio Rescuer Settings section allows you to configure the following radio rescuer settings
and information:
6. The Advanced Properties section contains the following configurable items:
7. Click OK to use the changes to the running configuration and close the dialog.
8. Click Cancel to close the dialog without committing updates to the running configuration.
AP Name Displays the name assigned to the AP. The AP name can be configured on the
Access Port Radios Configuration page.
AP Type Displays the type of Access Port detected. The switche supports Brocade Mobility
7131N-FGR Access Points.
Radio Type Displays the radio type of the corresponding APs.
Available type are:
•
802.11a
•
802.11an
•
802.11bg
•
802.11bgn
AP Location Displays the current location for the selected AP. The location can be configured
on the Access Port Radios Configuration page.
Available Radios Displays a list of radios available to be used as rescuer radios.
Rescuer Radios Displays a list of radios that have been configured as Rescuer Radios.
Add Click the Add button to add a selected radio or radios from the Available Radios list
into the Rescuer Radios list.
Remove Click the Remove button to remove a selected radio or radios from the Recuer
Radios list.
Rescuer MAC Displays the Media Access Control (MAC) Address of the selected Rescuer Radio.
AP Name Displays the configured AP Name for the selected Rescuer Radio.
AP Location Displays the configured AP Location for the selected Rescuer Radio.The location
can be configured on the Access Port Radios Configuration page.
Rescuer Power Displays the current power level of the selected Rescuer Radio.
Rescuer Attenuation Displays the current Attenuation power for the selected Rescuer Radio.
Antenna Gain Specify the desired antenna gain in dBi for the selected radio.
Coverage Rate Specify the desired coverage rate for the selected radio from the pulldown menu
options.
Lock Detector Enable or disable radio detector mode lock for the selected radio.
Lock TX Power Check this box to lock the TX power for the selected radio.
Lock Channel Check this box to lock the channel for the selected radio.
Lock Rescuer Check this box to lock the rescuer radio for the selected radio.