Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 161)

Brocade Mobility RFS7000-GR Controller System Reference Guide 147
53-1001944-01
Viewing and configuring switch WLANs
4
3. Click on the Add button in the List Configuration field.
4. The List Name displays the read-only name of the list for which you wish to add more devices.
5. Enter the Host Name for the device you wish to add for the selected exclude list.
6. Enter a valid MAC Address for the device you wish to add.
7. Optionally, enter the MAC Mask for the device you wish to add.
8. Refer to the Status field. It displays the current state of the requests made from the applet.
Requests are any “SET/GET” operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to save and add the new configuration and close the dialog window.
10. Click Cancel to close the dialog without committing updates to the running configuration.
Mapping exclude list items to WLANs
To assign exclude list items to a one or more WLANs:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view NAC excluded devices.