Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 350)

336 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring firewalls and access control lists
6
4. The Wireless Filters tab contains the following read-only information:
5. Refer to the Associated WLANs field for following
MU-ACL Index Displays a numerical identifier used to associate a particular ACL to a range of
MAC addresses (or a single MAC address) that are either allowed or denied access
to the switch managed network.
Starting MAC Displays the beginning MAC Address (for this specific Index) either allowed or
denied access to the switch managed network.
Ending MAC Displays the ending MAC Address (for this specific Index) either allowed or denied
access to the switch managed network.
Zone ID Displays a Zone ID associated with each Wireless Filter. Zone ID can be between 1
and 48. Zones allows you to associate firewall policies to each zone. All members
of the same zone will have the same firewall policies applied to them.
Allow/Deny States whether this particular ACL Index and MAC address range has been allowed
or denied access to the switch managed network.
WLANs Displays the WLANs associated with each Wireless Filter.
WLAN Index Highlight an Index to display the name(s) of the WLANs currently associated with
this particular Index. Click the Membership
button to map available WLANs to this
filter.
ESSID Displays the SSID required by the devices comprising this WLAN.
Authentication Displays the authentication scheme configured for the devices comprising this
WLAN.
Encryption Displays the encryption method configured for the devices comprising this WLAN.