Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 181)

Brocade Mobility RFS7000-GR Controller System Reference Guide 167
53-1001944-01
Viewing Access Port Information
4
5. To enable the automatic adoption of non-configured radios on the network, select the Adopt
unconfigured radios automatically option. Default radio settings are applied to Access Ports
when automatically adopted. Enable this option to allow adoption even when the Access Port
is not configured. Default radio settings are applied to Access Ports adopted automatically.
6. To limit the number of voice enabled MUs which are associated, click the Voice Call Admission
Control checkbox. Limiting voice MU traffic in a supported WLAN is a good idea to maintain
data rates, voice quality and throughput. WMM admission control is a mechanism for limiting
traffic on a given access category. Per the recommendation of the 802.11e specification,
Brocade limits support of this feature to voice and video. The switch configures the AP to
broadcast that admission control is configured by default on Brocade access points.
7. To use WIPS enter a Primary WIPS Server Address and Secondary WIPS Server Address into
the corresponding fields.
8. Click the Configure Port Authentication button to open a new dialogue with port authentication
configuration information.
9. Click OK to save the changes and return to the previous screen.
Port authentication
To configure the port authentication settings on an Access Port:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Configuration tab.
3. Click the Global Settings button.
4. Click the Configure Port Authentication button.
5. Enter the 802.1x Username assigned to the Access Port.
6. Enter the 802.1x Password (for the corresponding username) providing authorization for
Access Port authorization adoption.
NOTE
The default user name and password for Brocade Mobility 7131N-FGR Access Point port
authentication is a user name of admin and a password of symbol.