Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 62)

48 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing switch port information
3
A Port Change Warning screen displays, stating any change to the port setting could disrupt
access to the switch. Communication errors may occur even if modifications made are
successful.
3. Click the OK button to continue.
Optionally, select the Don’t show this message again for the rest of the session , checkbox to
prevent the pop-up from being displayed for the rest of the session. .
4. Use the Edit screen to modify the following port configurations for the selected port.
Name Displays the read-only name assigned to the port.
Speed Select the speed at which the port can receive and transmit the data. Select from
the following range:
•
10 Mbps
•
100 Mbps
•
1000 Mbps
•
Auto