Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 210)

196 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
3. Click the Smart RF Settings button
4. Click the Check All Boxes option in the Smart RF Global Settings dialogue to check every box in
the configuration window. To uncheck all boxes click this box a second time.
5. Check the Enable Smart RF Module box to enable Smart RF functions on the switch.
The remainder of the Smart RF Settings screen is divided into the following four sections:
• Calibration Configuration
• Monitoring/Recovery Configuration
• Diagnostic Configuration
• Calibration Schedule
6. The Calibration Configuration section contains the following RF calibration settings:
Assign - Detector Check this box to enable automatic assignment of radio detectors.
Assign - Channel Check this box to enable automatic assignment of channels to working radios to
avoid channel overlap and avoid interference from external RF sources.