Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 547
Advertising
Brocade Mobility RFS7000-GR Controller System Reference Guide
533
53-1001944-01
Configuring a Wireless IDS Deployment
C
3. In the Detection Window field, specify the detection window interval (in seconds) the RF Switch
uses to scan for violations.
In this example, a 60 second detection window is defined. Click Apply.
4. Within the Violation Parameters table, locate Excessive Authentication failure then enter a
threshold value in the Mobile Unit, Radio and Switch fields.
5. Additionally, in the Time to Filter field enter a value (in seconds) the MU will be blacklisted for
when violations occur. In this example, the Mobile, Radio and Switch threshold is set to 10.
Click Apply.
6. Select the Filtered MUs tab.
Advertising