Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 156)

142 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing and configuring switch WLANs
4
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include List Configuration tab to view and configure NAC enabled devices.
3. The Include Lists field displays the list of devices that can be included on a WLAN (a printer for
example).
Use the Add button to add a device for configuration on a WLAN. A maximum of 6 MAC
addressees are allowed per device. For more information, see
“Adding an include list to a
WLAN” on page 143.
The List Configuration field displays a list of MAC addresses that can be included on a WLAN.
You can add more than one device in this list. For example, printer 1, printer 2 etc.
4. Use the Add button (within the List Configuration field) to add more than one device to the
WLAN. You can create 32 lists (both include and exclude combined together) and 64 MAC
entries per list. For more information, see
“Configuring devices on the include list” on
page 143.
5. The Configured WLANs field displays available WLANs. Associate a list item (within the Include
Lists field) with as many WLANs as required.
For information on mapping NAC Include list items with WLANs, see “Mapping include list items
to WLANs” on page 144.
6. To delete a device (and its configuration), select it from the Include Lists and click the Delete
button
7. Use the Edit button in the List Configuration section to modify the devices parameters.
8. To delete any list configuration for a particular device, select the row from the List
Configuration section and click on the Delete button.