Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 149
Brocade Mobility RFS7000-GR Controller System Reference Guide
135
53-1001944-01
Viewing and configuring switch WLANs
4
1. Select a WLAN from the table displayed in the Statistics screen.
2. Click the Graph button.
The WLAN Statistics screen displays for the select port. The WLAN Statistics screen provides
the option of viewing the graphical statistics of the following parameters:
•
Pkts per sec
•
Throughput (Mbps)
•
Avg Bits per sec
•
Avg Signal (dBm)
•
Dropped Pkts
•
TX Pkts per sec
•
TX Tput (Mbps)
•
NUcast Pkts
•
Avg Noise (dBm)
•
Undecr Pkts
•
RXPkts per sec
•
RX Tput (Mbps)
•
Avg Retries
•
Avg SNR (dB)
•
# Radios
NOTE
You cannot select (and trend) more than four parameters at any given time.
3. Select any of the above listed parameters by clicking on the checkbox associated with it.
4. Click the Close button to exit the screen.