Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 262)

248 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
DHCP server settings
5
1. Select Services > DHCP Server from the main menu tree.
2. Click the Relay tab.
3. Refer to the Interfaces field for the names of the interfaces available to route information
between the DHCP Server and DHCP clients. If this information is insufficient, consider
creating a new IP pool or edit an existing pool.
4. Click the Edit button to modify the properties displayed on an existing DHCP pool. Refer to step
7 for the information that can be modified for the DHCP relay.
5. To delete an existing DHCP pool from the list of those available to the switch, highlight the pool
from within the Network Pool field and click the Delete button.
NOTE
The interface VLAN and gateway interface should have their IP addresses set. The interface VLAN
and gateway interface should not have DHCP client or DHCP Server enabled. DHCP packets cannot
be relayed to an onboard DHCP Server. The interface VLAN and gateway interface cannot be the
same.