Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 66)

52 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing switch port information
3
Detailed port statistics
To view detailed statistics for a port:
1. Select a port from the table displayed within the Statistics screen.
2. Click the Details button.
3. The Interface Statistics screen displays. This screen displays the following statistics for the
selected port:
Name Displays the port name.
MAC Address Displays physical address information associated with the interface. This address
is read-only (hard-coded at the factory) and cannot be modified.
Input Bytes Displays the number of bytes received on the interface.
Input Unicast Packets Displays the number of unicast packets (packets directed towards the interface)
received on the interface.
Input NonUnicast
Packets Displays the number of Non-Unicast Packets (Multicast and Broadcast Packets)
received on the interface.
Input Total Packets Displays the total number of packets received on the interface.
Input Packets Dropped Displays the number of received packets dropped by the interface by the input
queue of the hardware unit /software module associated with the VLAN. Packets
are dropped when the input Queue is full or unable to processing incoming traffic.
Input Packets Error Displays the number of packets with errors received on the interface. Input Packet
Errors are input errors due to: no buffer space/ignored packets due to broadcast
storms, packets larger than maximum packet size, framing errors, input rate
exceeding the receiver's date handling rate or cyclic redundancy check errors. In all
of these cases, an error is reported and logged.
Output Bytes Displays the number of bytes transmitted from the interface.