Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 147)

Brocade Mobility RFS7000-GR Controller System Reference Guide 133
53-1001944-01
Viewing and configuring switch WLANs
4
The Details screen displays the WLAN statistics of the selected WLAN. The Details screen
contains the following fields:
• Information
• Traffic
• RF Status
• Errors
Information in black represents the statistics from the last 30 seconds and information in blue
represents statistics from the last hour.
4. Refer to the Information field for the following information:
5. Refer to the Traffic field for the following information (both received and transmitted):
6. Refer to the RF Status field for the following information:
ESSID Displays the Service Set ID (SSID) for the selected WLAN.
VLAN Displays the name of the VLAN the WLAN is associated with.
Num Associated
Stations Displays the total number of MUs currently associated with the selected WLAN.
Authentication Type Displays the authentication method deployed on the WLAN.
Encryption Type Displays the encryption type deployed on the selected WLAN.
Adopted Radios Displays the radios adopted by the selected WLAN.
Pkts per second Displays the average total packets per second that cross the selected WLAN. The
Rx column displays the average total packets per second received on the selected
WLAN. The Tx column displays the average total packets per second sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN. The Rx column
displays the average throughput in Mbps for packets received on the selected
WLAN. The Tx column displays the average throughput for packets sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN. This includes all
packets sent and received. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN that are
non-unicast. Non-unicast packets include broadcast and multicast packets. The
number in black represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Avg MU Signal Displays the average RF signal strength in dBm for all MUs associated with the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.