Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 541)

Brocade Mobility RFS7000-GR Controller System Reference Guide 527
53-1001944-01
Configuring a Wireless IDS Deployment
C
4. Within the Network > Access Port Radio > Configuration screen, refer to the Properties field
and check the option Single-channel scan for Unapproved APs (for radios 1- 4 and 7-8) and
Dedicate this AP as a Detector AP (for radios 5-6).
In this example radios 1-4 and 7-8 will be configured for single channel scanning and radios
5-6 are configured as dedicated detectors.
5. From the switch menu tree select Security > Access Point Detection.
6. Select the Configuration tab.