Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX - Manual (Page 41)

Publication 0160-5.5 - September 1997
6-6 Using 160-DN1 with DeviceNet Scanner
Pick Input and Output Assemblies
for the Bulletin 160 (Continued) To choose these Assemblies, first select the “DNet Config” parameter
group as shown below:
To change the Output Assembly, double click on the “Output Assem-
bly” parameter. The following screen appears:
Enter Assembly Number 21 and click on the “Save to Device” button.
Repeat the above steps for the Input Assembly except set the value to
“71.”
➊
➋