Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX - Manual (Page 49)

Publication 0160-5.5 - September 1997
6-14 Using 160-DN1 with DeviceNet Scanner
Map Each Device in the Scan List
(Continued) Next map 32 bits of the Bulletin 160 output message to O:1.1. First
click the “Output” button in the Data Map section of the window.
Then choose “Discrete” from the “Map Data From:” list. From the
“Map Data To:” list choose “Poll message”. In the “Map Data To:”
section of the window, choose O:1.1, Bit 0, 32 bits of data, then click
the “Apply Segment” button. The Datatable map should appear as fol-
lows:
The datatable mapping is now complete. Click the “Close” button to
return to the scan list window. It should appear as follows:
➌
➋
➎
➊
➍
➐
➏