Map each device in the scan list, Map each device in the scan list -12, Set up the scan list (continued) – Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX User Manual
Page 47
Advertising
Publication 0160-5.5 - September 1997
6-12
Using 160-DN1 with DeviceNet Scanner
Set Up the Scan List (Continued)
Now the scan list window should appear as follows:
Map Each Device in the Scan List
Data from IO messages may be mapped to the SLC’s discrete I/O area
or to an I/O area located in the “M0” and “M1” files. This mapping
will determine where a ladder program can find the data that is passed
over the network. We will use the discrete area in our example.
To map the data, click the “Datatable Map...” button under the Scan
List Tools window. The following Datatable Map screen appears:
Advertising