Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX - Manual (Page 48)

Publication 0160-5.5 - September 1997
Using 160-DN1 with DeviceNet Scanner 6-13
Map Each Device in the Scan List
(Continued) Select “Data Entry” for the display mode. Since we will be mapping
to the discrete area, choose “Discrete” from the “Map Data To:” list
box as shown below:
The Bulletin 160 will be mapped as a polled device to the discrete
area. From the “Map Data From” box select the “Poll Message”
choice. To map the input data, choose the “Input” button. For this
example, map all 32 bits of the Bulletin 160 Input message to the first
32 bits in discrete input word I:1.1. In the “Map Data To:” section of
the window choose I:1.1, Bit 0, 32 bits of data, then click the “Apply
Segment” button. The Datatable map should appear as follows:
➍
➌
➏
➋
➎
➐
➊