Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX User Manual
Page 46
Advertising
Publication 0160-5.5 - September 1997
Using 160-DN1 with DeviceNet Scanner
6-11
Set Up the Scan List (Continued)
Edit the I/O data by either clicking Bulletin 160 in the scan list and
clicking the “Edit I/O Parameters” check box or by double clicking on
the Bulletin 160 in the scan list. The following screen appears:
To set up a polled IO connection, choose the following, then click the
OK button.
➊
➌
➍
➎
➋
Polled:
Enabled
Poll Rx Size: “4 Byte”
Poll Tx Size: “4 Byte”
Poll Rate:
“Every Scan”
Advertising