Interlogix VEREX Director - Manual (Page 151)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 143
Attention: Beginning with V4.4, area selection has
been redesigned, and clicking an area in the tiny
leftmost column causes settings to be copied to match
the area(s) already selected. See "Selecting Areas"
before you proceed.
Users Shared Across Multiple Accounts: Beginning
with Director V4.20, groups of users can be set up
once, and then applied to multiple accounts. This
involves reserving blocks of authorities for shared
users, assigning authority ID#s to specific shared users,
and defining appropriate authorities (at the correct ID#s)
for each account. For details, refer to "Users and
Holidays Shared Across Multiple Accounts".
User-Authorities for an Account
Authorities determine:
 When and where blocks of users will be able
to enter controlled areas, and;
 Which tasks they will be able to perform:
+ At system keypads, and;
+ In the "Control & Status" screens, and;
+ Per items on maps (Visual Director)
V4.0 .
For an operator to control items through this software,
they must also have "Control and Status" permission.
Related Topic: "Operator Permissions".
Reference Notes:
Authorities are defined here, and then assigned to
individuals through the Users screen.
Related Topic: "Users (Entrants / Panel Users)"
Authorities also determine which Control & Status
selections will be accessible to each operator (since
'Control & Status' requires entering a valid user
ID+PIN).
Suite-Security Keypad authorities are selected in the
screen for each specific user. For details, refer to the
section on "Users".
Additional authorities (and users) would typically need
to be set up for a 'Panic Token' application. For details,
see "Panic Token" under "
 Access  ", to follow.
Default Authorities ( V4.4)
Five default authorities are provided as a starting point
(associated with the default area).
Master:
Intrusion: Emergency Off, Isolate, Bypass, Auto-lift
Bypass, Service Test, Test, Silence Alarm, Status,
History, Function key, Work Late, Suspend Schedule,
Arm/disarm to On/Off/Stay, Token disarm (to Off, all
areas);
Access: Access when Area is Off/On/Stay, Master
Override, Reset Door Alarm, Door command, Class A,
Class B, Class C.
Supervisor:
Intrusion: Emergency Off, Isolate, Bypass, Auto-lift
Bypass, Test, Silence Alarm, Status, History, Function
key, Work Late, Suspend Schedule, Arm/disarm to
On/Off/Stay, Token disarm (to Off, all areas);
Access: Access when Area is Off/On/Stay, Escort,
Reset Door Alarm, Door command, Class A, Class B,
Class C.
Employee:
Intrusion: Silence Alarm, Status, Work Late, Arm/disarm
to On/Off/Stay;
Access: Access when Area is Off/On/Stay, Door
command, Class A, Class B, Class C.
Worker:
Intrusion: Status, Arm to On;
Access: Access when Area is Off/On/Stay, Class A,
Class B, Class C.
Cleaner:
Intrusion: Silence Alarm, Status, Work Late,
Arm/disarm to On/Off/Stay;
Access: Access when Area is Off/On/Stay, Class A,
Class B, Class C.
How to Get Here
MyTools Bar: Authorities
In the Tree: YourAccount, Authorities
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode. (Here, grid view is for
viewing purposes only.)
Things You Can Do
 Add a New Authority: Click [+] at the bottom
of the form, or right-click the blank area near
the top of the form and select "Add New" from
the pop-up menu.
 View/Change an Existing One: Select one
from the pop-up list at the bottom of the form.
 Search for an Authority: Click the
'binoculars' symbol. Then, enter the name and
click [Find].
Tip: You can search by name or the 1 st few
characters--e.g., nam* 
 Delete an Authority: Right-click the blank
area near the top of the form, and select
"Delete". When prompted to confirm, select
Yes.
Before Deleting: Only unused authorities can be
Authorities for Users/Entrants
( V4.4)