Interlogix VEREX Director - Manual (Page 207)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 199
4B: Assign Groups of Shared
Holidays to Accounts (Shared
Holiday Management)
Once the related "Shared Holiday
Groups" and "Shared Holidays" have
been set up (previous/above), groups
of shared holidays can be assigned to
applicable accounts.
Notes: Only 'Shared Holiday Groups' with
non-overlapping ID# ranges can be selected
for any specific account. As groups are
assigned to accounts, the shared holiday(s)
are copied to the same/applicable holiday
ID# in each account (from the ID# within
each shared group).
Viewing or Entering These Settings
For each specific account:
 Select
[Account Folders] in the 'tree', and
double-click the desired account.
 Select Account Information from the
MyTools bar, or in the tree. Then, select the
Shared Holidays tab.
Note: This tab will appear only if "Shared Holiday
Groups" have been set up (2C).
Then, refer to the selection-descriptions for this
screen while viewing or entering your desired
settings.
Note: 'Grid' view does not apply to this feature.
Screen Reference
- Select: This allows assigning a group of
holidays to the specific account. (Click this
box for each group to be assigned to the
present account.)
Tip: Holiday 1 and 2 pertain to the dates for changing
between Standard Time and Daylight-Savings time.
As such, a group of shared holidays may include
these as well.
- Group: Shows the name of the group of
shared holidays ("DST and xmas",
"CommonHols2", etc.).
- Holiday Range: Shows the range of holiday
ID#s associated with this group of shared
users;
Note: ID#1 pertains to changing to daylight-savings
time, and ID#2 is for changing back to Standard Time.
(Rem: 'Spring' ahead for Daylight-Savings, 'fall' back
for Standard Time.)
Account Folders AccountName Account
Information Shared Holidays 