Interlogix VEREX Director - Manual (Page 166)

158 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
Image
- Current Capture Device: This shows your
presently-selected image-capture device (or
"load image from file");
- (image area): This shows your tentatively-
selected user photo;
- [Select Capture Profile]: This allows
selecting a different image capture device (or
"load image from file");
- [Capture Image]: This allows capturing the
person's photo, or linking to an image file (e.g.,
from a handheld digital camera);
If prompted to select a capture profile: Select your
image-capture device (or "Load Image from File")
and click OK.
Settings Details: For information on the settings in
this screen, press F1. Tip: You can drag the dotted
border to reframe your image.
- [Clear Image]: This removes any image from
the image area (e.g., to remove a person's
image from the user screen);
- [Image Setup]: Allows you to set the 'aspect
ratio' (height-to-width ratio) of the captured and
printed images. (In general, leave other settings
as-is.)
Tip: Click Image Setup, select "Photograph" and click
[Edit] ).
Signature
Current Capture Device: This shows your
presently-selected image-capture device (or
"load image from file");
- (image area): This shows your tentatively-
selected signature;
- [Select Capture Profile]: This allows selecting
a different image capture device (or "load image
from file");
- [Capture Signature Image]: This allows
photographing the person's signature, or linking
to an image file (e.g., from a handheld digital
camera);
If prompted to select a capture profile: Select your
image-capture device (or "Load Image from File") and
click OK.
Settings Details: For information on the settings in this
screen, press F1. Tip: You can drag the dotted
border to reframe your image.
- [Sign Signature]: This allows using a writing
tablet (recommended), or your mouse to enter
your signature.
(signature area): This shows your signature as you
enter it. Tip: It is best to watch the screen while
signing (may take a little practise).
[Clear]: Click this to clear the screen and try signing
your name again;
[Cancel]: Click this to abort the task, leaving the
presently assigned signature in place (if present);
[Done]: Click this to insert your new signature onto
the user form.
- [Clear Signature]: This removes any image
from the signature area (e.g., to remove a
person's signature from the user screen);
- [Image Setup]: Allows you to change various
technical aspects of the specific image file. This
can be used to set the 'aspect ratio' (height-to-
width ratio) of the captured and printed images.
(In general, leave other settings as-is.)
Tip: Click Image Setup, select "Signature" and click
[Edit] ).
When You Click the 1st Button (face symbol)