Interlogix VEREX Director - Manual (Page 211)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 203
 Invalid Cards: Cards denied access due to:
 Not in database;  Wrong site number;
 Wrong version number;

High Risk: Cards denied access due to:  Card
expired;  Schedule expired;  Interlock violation;
 Reader locked out;  Wrong area.
- Maximum Invalid Cards: The number of times
an invalid card can be presented before that
card will be locked out (for the 'User Lockout
Duration');
- Transmit Global Lockout Alarm: For a
centrally-monitored facility, this determines if
'global lockouts' are to be transmitted to the
monitoring station.
 Site Address and Mailing
Address 
- Name: The name/description for the
site/account (as set through the "Standard" tab).
- Address: The address/location of the
site/account.
- [Copy Site Address to Mailing Address]: This
sets the "Mailing Address" to match the present
"Site Address".
 Contact 
- Phone: The voice/contact phone number for the
person who looks after the system.
- Contact: The on-site contact person for the
site/account.
- Comments: Additional information pertaining to
this site / account (optional).
 Service PIN 
This pertains to the service user/login (000) with access
to all features including configuration menus, service
test authority, and the ability to change the time and
date.
- Service PIN Mode ( V4.4): This sets the
operating characteristics of the service PIN.
Permanent: The service PIN entered under [Change
Service PIN] will remain in effect until changed
manually.
Six digit PIN of the day: This is a special calculated
PIN based on the date, your dealer code/ID, and other
factors. Contact your central monitoring facility to
obtain the required service PIN for the present day.
Note: [Change Service PIN] will not function while
this mode is in effect.
Related: YourAccount, Account Information,

Setup, "Dealer ID"
 Account-Wide Panel Settings
- [Change Service PIN]: Allows changing the
PIN required for a service person (user 00) to
access the panels in this account.
After changing the Service PIN, ensure the panel is
updated right away. For details, refer to "Panel
Communications and Updates".
Configuring a panel through an LCD keypad is
supported only in single-panel accounts set to "Feature
Set" 1-4 (see previous). Exception: Programming of
modules that require keypad programming (HSC/printer
module, RF module, & Smart-PODs, plus associated
I/O set-up) is supported in all systems.
 Shared Users
and
Shared
Holidays 
These tabs appear if you have shared users
and/or holidays set up.
Related Topic: "Users and Holidays Shared Across
Multiple Accounts" ("Phase 4: Assign Shared Items to
Accounts")