Interlogix VEREX Director User Manual
Page 333
21-0381E v4.9.1
Welcome Report Control Admin Sys
Config
Tech-Ref
325
Settings
,
Control Panel
, and
Phone and
Modem Options
.
3) Select the "Modems" tab, and click
[Add]
.
4) Select "Do not detect...", and click
[Next]
.
5) Under "Standard Modem Types", select
"Communications Cable between two
computers", and click
[Next]
.
6) Select the serial port (COMx) that the cable
will be using, and click
[Next]
.
7) Click
[Finish]
.
8) In the next screen, click
[OK]
to close the
screen.
Note: The name of the direct-cable-
connection will be set as "Communications Cable
between two computers"
.
Also See (Related Topics):
"New Installation? Try the Wizard!"
"Panel Connection Overview"
"
Setting Up a New System (Commissioning)"
"Panel Communications and Updates