Interlogix VEREX Director - Manual (Page 82)

74 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
tree, open Control & Status, and Panel Control &
Status (click the "+"), and login with your user ID and
PIN if prompted for this. Then, select your desired topic
in the 'tree' (under "Panel Control & Status").
If 'Panel-Groups' and 'Panels' are Listed Under Control
& Status: Select (open), your desired panel-group and
panel if these are listed in the 'tree'. Tip: "Control &
Status" (and configuration) topics can be set to display
either as a single list, or on a panel-by-panel basis.
(To change the view: Right-click "Control & Status",
and select or deselect Logical Tree View). For more
information, refer to "Other Desktop Choices".
-------------------------
Use the Grid / Form toolbar-button to select
your preferred view-mode (forms view is
generally recommended for Control & Status
topics).
Then, refer to the topic associated with your
desired Control & Status topic.
Note: If the status window appears blank, or
unavailable (items are grey in color), this means you
are not connected with the specific panel or account.
To initiate a connection, refer to "Connecting to the
Associated Panel(s), An Overview" (previous/above).
Automatic Login: To set the 'login' to occur
automatically for a specific operator, refer to the section
on "Operators".
If "Cannot Log In to Control and Status due to a
Conflict" appears: This means the same data may
have been changed through the software and locally
through a keypad. When an operator with configuration
permissions accesses the 'configuration' topic for the
mentioned item, they will be prompted to correct the
conflict. For details, refer to "Correcting
Communication / Update Errors".