Input points—custom point types – Interlogix VEREX Director User Manual
Page 278
270
Verex Director V4.9.1 User's Guide
21-0381E v4.9.1
Custom Input Point Types
In addition to the extensive list of pre-defined
point types, custom input point types can be
set up to tailor input-point characteristics to
meet your specific needs. Once defined, these
are referred to as Point Types 80-99.
Custom point types allow setting up:
Garage/extended-delay sensors; Vault/safe inputs;
Command Points; Activity-monitoring inputs; -- plus
special functions including:
Guard tour" checkpoints
(stations);
WorkLate" buttons; Area arm/disarm
keyswitch;
Battery Fail; Mains Fail.
As with doors, points, etc., custom point-types pertain
to an individual panel, and must be set up for each
panel requiring the selected input-monitoring
characteristics.
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: Custom Point Types
In the Tree: Configuration
(click the "+")
,
Custom Point Types
(Under the specific panel
group and panel--if listed in the 'tree'.)
Related
Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
Add a Custom Point Type: Click [+] at the
bottom of the form, or right-click the form and
select Add New from the pop-up menu.
View/Change an Existing One: Select one
from the pop-up list at the bottom of the
form.
Search for a Custom Point Type: Click the
'binoculars' symbol. Then, enter the name
and click [Find].
Tip: You can search by name or the 1
st
few
characters--e.g., nam*
Delete a Custom Point Type: Right-click a
blank area on the form (
If grid view: Right-click
the item in the list
), and select "Delete". When
prompted to confirm, select Yes.
Before Deleting: Only unused custom point-types
can be deleted. (Issue an input-point report, OR go
to the Input Points configuration screen, select grid
view, and check for the specific custom point-type
(80-99) in the list.)
Related Topic(s):
Reporting on Users, System/Device Settings, etc.;
Working with the Report Viewer
Working in Grid View: You can:
View or enter values;
Right-click an item and select from the pop-up menu;
Click a column heading to sort on that column.
(Filter on Column: Shows only items matching an
entered value or 1
st
few chars.--e.g., nam*. A red
column heading indicates the list is filtered.)
Input Points—Custom Point Types