Interlogix VEREX Director - Manual (Page 365)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 357
connections are 'serial', with or without
conversion to "RS485". (RS485 connections
allow for longer distances, and/or multiple
panels per connection.)
IP Connections: Secure and regular IP connections
are also supported.
More: IP Connectivity
Dial up panels with dedicated external modems (one
panel per modem) can be set to automatically dial-in
to the VEREX Director system to transmit alarms or
blocks of activity messages. In other configurations,
the alarms and events are transmitted when a
connection is made with the specific panels
(immediately, at a pre-programmed time, or on a
repeating schedule).
Central monitoring is configured separately (for each
individual panel), utilizing the 'Bell 103' (300 baud)
modem/dialler built into each main panel, and/or an
IP connection (SIP Reporting), or high-security
communications (HSC--via Mark7/DVACS service in
Canada). Tip: HSC modules also support a printer.
The built-in modems can also be used to remotely
manage smaller sites (single-panel accounts with up
to 300 users).
VEREX Director panel communications are managed
through "Communication Pools", which allow
selecting groups of modems to choose from when
'calling' a specific panel/site. Note: Communication
'pools' are used in all systems.
Initiating a connection with desired panel(s) allows a
VEREX Director operator to monitor activity at an
account (live/real-time), monitor guard-tours that are
in effect, perform status-checking and device-control
tasks, and/or synchronize panels with the software.
Note: Panel updates can also be scheduled for
regular intervals and/or 'quiet' times at the specific
sites (such as overnight).
Alarm System Hardware
Main system panels, LCD keypads, and
expansion modules provide the basic building
blocks for each security system. Monitoring
sensors, and various output/signalling devices
complete the system.
System Capacities: For an extensive list of the number
and types of
devices supported, refer to "System Capacities".
Main System Panels: This is the box or panel
on the wall that acts as the brain of the system.
All of the various detection devices connect to
it. When a device is triggered, the control panel
activates sirens or lights. If monitored, it alerts
the Monitoring Station through the telephone
lines (HSC or dial-up).
Expansion Modules: Various expansion
modules are supported allowing additional
monitored sensors, programmable outputs,
and/or special features to be added to the
system (such as door/access control,
elevator/floor control, and suite security). All
modules from an existing Fx or FxPro system
are also supported. The system supports a
total of 24 expansion modules (or 60 suite-
security keypads).
xL LCD Keypad: A keypad provides users
with on-site control, and the ability to operate
the total alarm system. As well, LCD keypads
provide an on-premise read-out indicating the
location and nature of alarms.
Suite-Security Keypad: These units provide
security features for 1 - 8 users in a single
apartment/suite or facility. A suite-security
keypad can be thought of as a private security
system, providing intrusion monitoring and
signalling features for a single suite/facility.
Two types are available: 2-zone & 8-zone.
Contacts (Door and Window sensors):
These are magnetic sensors that detect door
or window openings. Contacts are normally
required on exterior doors and both ground-
floor and basement windows that can be
opened. Upper-level doors and windows that
can be reached from the roof, balcony, or
'deck' should also be protected.
Motion Detector: This is a device mounted
strategically inside the facility to detect motion
within a predetermined area. The most
commonly used type is the infrared detector,
which senses changes in infrared energy
(temperature) related to movements within the
coverage area. The coverage pattern and
sensitivity of the unit can be adjusted during
the installation to avoid false alarms due to
pets.
Glass Break Detector: This is a sensor
placed on a window or skylight that initiates an
alarm at the moment glass is broken. This
sensor 'listens' for the distinct sound of
breaking glass or the feel of its vibrations.
These sensors are not always necessary,