Interlogix VEREX Director - Manual (Page 89)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 81
Global User Lockouts
The 'Bad Card/PIN' tracking feature
helps to prevent unauthorized persons
'hacking' their way into a controlled area.
All users can be locked out automatically
if a lot of invalid cards and/or PINs are
detected during a set time.
Related:  Account Information Bad
Card/PIN;  Configuration Areas
 Access "Bad Card Action"
The [Clear User Lockout] button allows
clearing the lockout, so all authorized
persons can enter as usual.
Clearing a Global User Lockout
Initiate a connection with the panel(s),
and access the "
System " Control &
Status topic as described
previously/above.
Multi-Panel Systems: Select the desired panel at the
bottom of the form (if not shown/selected in the 'tree').
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Then, click [Clear User Lockout] , and watch
for the status indicator to change.
Screen Reference
- Panel (bottom of the form): This is where you
select a desired panel (for systems with more
than one).
Alternative: You can also set the 'tree' to list status
topics on a panel-by-panel basis. For details, refer to
"Other Desktop Choices".
User Status
- [Clear User Lockout]: This allows resetting a
"Global User Lockout" triggered by the 'Bad
Card/PIN' tacking feature.
- Global User Lockout: This shows whether or
not a 'Global User Lockout' is presently in effect.
Related:  Account Information Bad Card/PIN
Clearing a "Bad Card/PIN Global Lockout"
Control & Status Panel Control & Status

System [Clear User Lockout]