Interlogix VEREX Director - Manual (Page 95)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 87
Screen Reference
-Panel (bottom of the form): This is
where you select a desired panel (for
systems with more than one).
Tip: "Control & Status" (and configuration)
topics can be set to display either as a
single list, or on a panel-by-panel basis.
(To change the view: Right-click "Control &
Status", and select or deselect Logical Tree
View). For more information, refer to
"Other Desktop Choices".
On This Screen
Power Status
- [Refresh Power Status]: Click this to refresh
the data onscreen.
- (Columns of Data): This screen shows the
status of various items pertaining to mains input
voltage, battery life remaining, etc.
Note: Some features are supported only by xL panels.
Unsupported items will be shown as zero (0).
Control & Status Panel Control & Status

System Power