Interlogix VEREX Director - Manual (Page 163)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 155
- Type: This sets the basic type (i.e., validation
method) for card.
No User Access: The card/token and user PIN will be
unusable.
Pending Enrolment: The card/token and user PIN will
be unusable until the card is accepted at a reader that
is set for "Card Enrolment".
Related Settings:

Account Information, Setup,

Card Action (Ignore Pending Enrolment) .
See: Account-Wide Panel Settings.
 Configuration, Doors, In Reader,  [Card
Action] . See: Reader 1 & 2 Settings for a Door.
By Date Time: This allows setting a user/card to
activate on a specific date and time and/or deactivate
on a specific date and time.
Permanent User: This sets a user/card to activate
right away with no expiry date/time.
Authority Plus: For a permanent user, this allows
assigning an optional second authority to apply during
a specific date/time range. This pertains to users
associated with an individual account (i.e., not shared
users).
- Authority Plus: This sets an additional /
temporary 'authority' profile to apply to the user
during the selected date/time range.
Notice: During the selected date/time range, the user
will have authorities as provided through their "System
Authority" (previous), AND as provided through the
temporary authority selected here. When this second
authority expires, the user/card will revert to
'permanent' with authorities as per the "System
Authority" only.
For details on setting up authorities, refer to
"Authorities for Users / Entrants".
- Valid On: The beginning date/time that this
user's card, and ID/PIN can be used (or "Now /
Immediate").
Tip: You can change the dates manually, or click the
arrow to select from a pop-up calendar. To set the
times (hours), click within the 'hours' setting, and use
the up/down arrow keys to adjust.
Note: Time values (hours) apply only with specified
validation and invalidation dates for periods of less
than 6 months.
- Invalid On: The expiry date/time for this user's
card, and ID/PIN (or "Forever / Permanent").
(Also see the preceding 'tip'.)
 Custom xx 
(systems with custom user-fields)
Blocks of 5 additional (optional / custom) user
information categories as defined through the
"Custom Fields" screen (these may include
Position, Department, vehicle license, etc.).
These items can be used when sorting or filtering lists
of users (In Grid View), and can also be referenced by
various types of Time & Attendance reports. For
details on setting up these custom user fields, refer to
"Custom Information Categories for Users".
 Suite 
(systems w/suite-security keypads)
Authority Level Settings
Notes: User 'authorities' (as selected elsewhere) do not
affect suite security keypads. (All suite-security
permissions for users are selected here). Support for
suite-security keypads is optional (enabled through the
license-manager software). This feature also requires
selecting "feature-set" 5 or higher and "suite security"
under "Account Information" in the tree. As well, this
'tab' will appear only if at least one suite security
keypad is defined.
Related Topics:
+ "Software Activation and Licensing".
+ "Account-Wide Panel Settings".
- Belongs to Suite: This is the
apartment/keypad associated this user (if
applicable). For more information, refer to
"Suite-Security Keypad Users" near the
beginning of this section.
- Authority Level: Pre-set suite-security keypad
user types:
+ System Authority Only: No access to the suite-
security system;
+ Suite-Security Unassigned: This is for a
pending/reserved user. (No keypad access, but
can be changed by a person with "Suite-Security
Master" authority.)
+ Other selections: As per the authority settings
shown on-screen.
- Authority Settings: This shows the authorities
associated with the "Authority Level" selected
above. These pertain to the tasks that each
user will be able to perform at the keypad in
their unit.
Allow Suite Security Control
- This allows setting the manual control
arming/tasks that this user will be able to
perform through this software (via maps, or
through the 'Suite Security' control & status
screen).
Operator Permissions: This 'tab' will be available only
for operators with "Users – Suite" operator permission.