Interlogix VEREX Director - Manual (Page 277)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 269
Input Points—Pre-Defined Sensor Types
Burglary Points:
Type Arming Level Preprocess Class By-
pass
Chime Tx
Off
Tx
Stay
Tx
On
Sonlrt
Off
Sonlrt
Stay
Sonlrt
On
Siren
Off
Siren
Stay
Siren
On
Entry Door Perimtr Door (area 1) Burg --  --   --   --  
Entry Route 12hr E/E Route Burg  -- --  --  -- -- 
Perimeter Perimeter Immed Burg   --   --   --  
Interior Motion 12hr Immed Burg  -- --  -- --  -- -- 
FAP - Motion 12hr FAP Burg  -- --  -- --  -- -- 
Day Warning 24hr Immed Burg  -- --     -- -- 
24hr Burglary 24hr Immed Burg  --         
Life/Safety Points:
Type Arming Level Preprocess Class By-
pass
Chime Tx Off Tx
Stay
Tx On Sonlrt
Off
Sonlrt
Stay
Sonlrt
On
Siren
Off
Siren
Stay
Siren
On
Fire - A 24hr Immediate Fire-A         
Fire 24hr 15s delay Fire         
Fire 24hr Immediate Fire         
Hold-up 24hr Immediate holdup   
Aux Alert 24hr Immediate Emerg         
Supervisory Points:
Type Arming Level Preprocess Class By-
pass
Chime Tx Off Tx
Stay
Tx On Sonlrt
Off
Sonlrt
Stay
Sonlrt
On
Siren
Off
Siren
Stay
Siren
On
Supervisory 24hr Immediate Spvsr       
Battery Fail 24hr Battery Fail Spvsr       
Mains Fail 24hr Mains Fail Spvsr       
Local Points:
Type Arming Level Preprocess Class By-
pass
Chime Tx
Off
Tx
Stay
Tx
On
Sonlrt
Off
Sonlrt
Stay
Sonlrt
On
Siren
Off
Siren
Stay
Siren
On
Local - 24hr 24hr Immed Burg       
Local-Stay&On Perimeter Immed Burg      
Local-
Stay2 & ON Perimeters Immed Burg    
Local -
ON only 12 hr Immed Burg    
Legend:
 The 'Class' setting determines the type of alarm message to be transmitted;
 Bypass means whether or not the input point will be bypassable;
 Chime pertains to whether or not the triggering of the input will cause audible tones at keypads in the
area (normally used with Entry points/routes to let you know that someone has entered);
 Tx Off, Stay, and On pertain to the arming levels for which activation of the input point will cause an
alarm to be transmitted to the monitoring station;
 Sonlrt Off, Stay, and On pertain to the arming levels for which activation of the input point will cause
keypad 'sonalerts' in the area to be sounded for one second.
 Siren Off, Stay, and On pertain to the arming levels for which activation of the input point will cause
siren outputs in the area to be sounded.