Maxim Integrated High-Speed Microcontroller Users Guide: Network Microcontroller Supplement - Manual (Page 207)

High-Speed Microcontroller User’s
Guide: Network Microcontroller
Supplement
207
task_kill
Description: int task_kill(
int id); /* id of the task to be killed */
The task_kill function kills a task. This function destroys a task and frees its state buffer. ID 0 means current task. It returns a
success/failure code in the accumulator (ACC). Note: This function does not interact with the socket code. Call the socket
function cleanup() to close all associated sockets.
task_suspend
Description: int task_suspend(
int id, /* id of task to be suspended */
int eventmask; /* eventmask to be satisfied before awakening */
The task_suspend function suspends a task. It suspends a task until all events in eventmask have been generated. ID 0
means current task. This function returns a success/failure code in the accumulator. Before task suspension, the switch_out()
hook is called. To wake up a task, use task_signal().
task_sleep
Description: int task_sleep(
int id, /* id of the task to be put to sleep */
int eventmask; /* eventmask to be satisfied before awakening */
int milliseconds); /* number of milliseconds the task must sleep */
The task_sleep function puts a task to sleep. It suspends a task until at least milliseconds milliseconds have elapsed or the
eventmask has occurred (use eventmask = 0 for regular sleep). ID 0 means current task. Before suspension, the switch_out()
hook is called. The function returns a success/failure code in the accumulator (ACC).
INPUT DESCRIPTION OUTPUT DESCRIPTION
ACC
B
R3:R0
id
eventmask
milliseconds
ACC Success (= 00h) or failure code
Example:
CLR A
MOV B, A ;regular sleep for 10 seconds = 10000ms
MOV R3, #0
MOV R2, #1
MOV R1, #0
MOV R0, #0
ROMCALL task_sleep
INPUT DESCRIPTION OUTPUT DESCRIPTION
ACC
B
id
eventmask
ACC Success (= 00h) or failure code
Example:
CLR A
MOV B, #TASK_DHCPSLEEP
ROMCALL task_suspend
INPUT DESCRIPTION OUTPUT DESCRIPTION
ACC id ACC Success (= 00h) or failure code
Example:
MOV DPTR, #DHCP_TASKID
MOVX A, @DPTR
ROMCALL task_kill
Maxim Integrated