Pilz PSSnet SHL 8T MRP User Manual
Page 116
Network load control
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.3 Rate Limiter
117
Setting options per port:
X
"Ingress Packet Types" allows you to select the packet type for
which the limit is to apply:
X
All, limits the total inbound data volume at this port.
X
BC, limits the broadcast packets received at this port.
X
BC + MC, limits broadcast packets and Multicast packets re-
ceived at this port.
X
BC + MC + uUC, limits broadcast packets, Multicast packets,
and unknown Unicast packets received at this port.
X
Ingress Limiter Rate for the inbound packet type selected:
X
= 0, no ingress limit at this port.
X
> 0, maximum inbound traffic rate in kbit/s that can be received
at this port.
X
Egress Limiter Rate for broadcast packets:
X
= 0, no rate limit for outbound broadcast packets at this port.
X
> 0, maximum number of outbound broadcasts per second that
can be sent at this port.
X
Egress Limiter Rate for the entire data stream:
X
= 0, no rate limit for outbound data stream at this port.
X
> 0, maximum outbound transmission rate in kbit/s sent at this
port.
Figure 31: Rate Limiter