Pilz PSSnet SHL 8T MRP - Manual (Page 71)

Configuring the ports
72
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
„
Displaying connection error messages
In the state on delivery, the device displays connection errors via the sig-
nal contact and the LED display. The device allows you to suppress this
display, because you do not want to interpret a switched off device as an
interrupted connection, for example.
„
Configuring Power over ETHERNET (if available)
Devices with Power over ETHERNET (PoE) media modules or PoE ports
enable you to supply current to terminal devices such as IP phones via
the twisted-pair cable. PoE media modules and PoE ports support Power
over ETHERNET according to IEEE 802.3af.
On delivery, the Power over ETHERNET function is activated globally and
at all ports.
If the device is equipped with PoE media modules, you will then have the
option of supplying current to devices such as IP phones via the twisted-
pair cable. PoE media modules support Power over ETHERNET accord-
ing to IEEE 802.3af.
On delivery, the Power over ETHERNET function is activated globally and
on all ports.
Select the
Basics:Port Configuration dialog.
In the "Signal contact mask" column, select the ports for which you
want to have link monitoring.