Pilz PSSnet SHL 8T MRP - Manual (Page 53)

Loading/saving settings
54
3.1 Loading settings
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
3.1 Loading settings
When it is restarted, the device loads its configuration data from the local
non-volatile memory, once you have not activated BOOTP/DHCP and no
SCA is connected to the device.
During operation, the device allows you to load settings from the following
sources:
X the local non-volatile memory
X the AutoConfiguration Adapter. If an SCA is connected to the device, the
device always loads its configuration from the SCA.
X a file in the connected network (= state on delivery)
X a binary file and
X the firmware.
Note: When loading a configuration, do not access the device until it had
loaded the configuration file and has made the new configuration settings.
Depending on the complexity of the configuration settings, this procedure
can take 10-200 seconds.