Pilz PSSnet SHL 8T MRP - Manual (Page 179)

Setting up configuration environment
180
A.1 Setting up DHCP/BOOTP server
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
A.1 Setting up DHCP/BOOTP
server
On the CD-ROM supplied with the device you will find the software for a
DHCP server from the software development company IT-Consulting
Dr.
Herbert Hanewinkel. You can test the software for 30 calendar days
from the date of the first installation, and then decide whether you want to
purchase a license.
To install the DHCP servers on your PC,
put the CD-ROM in the CD drive of your PC and
under Additional Software select "haneWIN DHCP-Server".
To carry out the installation, follow the installation assistant.
Start the DHCP Server program.
Figure 54: Start window of the DHCP server
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the ser-
vice responds to DHCP queries.
Open the window for the program settings in the menu bar: Op-
tions:Preferences and select the DHCP tab page.