Pilz PSSnet SHL 8T MRP - Manual (Page 57)

Loading/saving settings
58
3.1 Loading settings
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
3.1.4 Resetting the configuration to the state on
delivery
The device enables you to
X reset the current configuration to the state on delivery. The locally saved
configuration is kept.
X reset the device to the state on delivery. After the next restart, the IP
address is also in the state on delivery.
Setting in the system monitor:
Select 5 “Erase main configuration file”
This menu item allows you to reset the device to its state on delivery. The
device saves configurations other than the original one in its Flash mem-
ory in the configuration file *.cfg.
Press the Enter key to delete the configuration file.
Select the
Basics: Load/Save dialog.
Make your selection in the "Delete" frame.
Click "Delete configuration".