Pilz PSSnet SHL 8T MRP - Manual (Page 54)

Loading/saving settings
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
3.1 Loading settings
55
3.1.1 Loading from the local non-volatile memory
When loading the configuration data locally, the device loads the configura-
tion data from the local non-volatile memory if no SCA is connected to the
device.
3.1.2 Loading from the AutoConfiguration Adapter
If an SCA is connected to the device, the device always loads its configura-
tion from the SCA.
The chapter
„Saving locally (and on the SCA)“ dialog on page 59 describes
how to save a configuration file on an SCA.
Select the
Basics: Load/Save dialog.
In the "Load" frame, click "Local".
Click "Load configuration".
enable Switch to the Privileged EXEC mode.
copy nvram:startup-config
system:running-config The device loads the configuration data from the
local non-volatile memory.