Pilz PSSnet SHL 8T MRP - Manual (Page 127)

Network load control
128
8.4 QoS/Priority
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
„
Always assign the DSCP priority to received IP data pack-
ets globally
„
Configuring Layer 2 management priority
Configure the VLAN ports to which the device sends management
packets as a member of the VLAN that sends data packets with a tag
(see on page 134 „Examples of VLANs“) .
enable Switch to the Privileged EXEC mode.
configure Switch to the Configuration mode.
classofservice trust ip-
dscp Assign the "trust ip-dscp" mode globally.
exit Switch to the Configuration mode.
exit Switch to the privileged EXEC mode.
show classofservice trust Display the trust mode.
Class of Service Trust Mode: IP DSCP
Select the QoS/Priority:Global dialog.
Select trustIPDSCP in the "Trust Mode" line.
Select the QoS/Priority:Global dialog.
In the line VLAN priority for management packets you enter
the value of the VLAN priority.
enable Switch to the Privileged EXEC mode.
network priority dot1p-vlan
7 Assign the value 7 to the management priority so
that management packets with the highest priority
are sent.
exit Switch to the privileged EXEC mode.
show network Displays the management VLAN priority.
System IP Address.............................. 10.0.1.116Subnet
Mask.................................... 255.255.255.0Default
Gateway................................ 10.0.1.200Burned In MAC
Address.......................... 00:80:63:51:7A:80Network Config-
uration Protocol (BootP/DHCP).... NoneDHCP Client ID (same as SNMP
System Name)...... "PowerMICE-518280"Network Configuration Proto-
col HiDiscovery..... Read-WriteManagement VLAN
ID............................. 1Management VLAN Priori-
ty....................... 7Management IP-DSCP Val-
ue....................... 0(be/cs0)Web
Mode....................................... EnableJavaScript
Mode................................ Enable