Enterasys Networks X-Pedition XSR CLI - Manual (Page 182)

OSPF Debug and Show Commands
5-106 Configuring the Internet Protocol
debug ip ospf lsas
This command debugs OSPF Link State Advertisements (LSAs). As with all XSR debug
commands, it is set to privilege level 15 by default.
Syntax
debug ip ospf lsas
Syntax of the “no” Form
The no form of this command returns the debug function to the default:
no debug ip ospf lsas
Mode
EXEC configuration: XSR>
Examples
The following example displays an LSA added to the database:
OSPF: Add LSA. summary, aid:0.0.0.4 age:0000 opt:02 id:53.53.53.0 rid:1.1.1.4
seq:80000001 chk:4867 l:28
The following example displays a received Type 1 (router) LSA:
OSPF: Rx LSA. router, nbr:10.0.0.1 age:002f opt:22 id:10.0.0.1 rid:10.0.0.1
seq:800001aa chk:f671 l:36
The following example displays a queue delayed acknowledgement:
<191>May 21 07:52:39 1.1.1.4 OSPF: Queue Delayed Ack. router, nbr:10.0.0.1
age:002f opt:22 id:10.0.0.1 rid:10.0.0.1 seq:800001aa chk:f671 l:36
The following example displays an AS border router Type 4 summary LSA:
OSPF: Rx LSA. asbr-summary, nbr:10.0.0.1 age:03e6 opt:02 id:10.0.0.1 rid:1.1.1.4
seq:80000065 chk:3c9f l:28
The following example displays a transmitted external Type 5 LSA from outgoing interface
GigabitEthernet 2:
Rx PKT OSPF Packet received.
is Ok OSPF received packet passed verification.
is NOk OSPF received packet failed verification (i.e., Area ID does not match).
Database OSPF Database Description Packet.
LS request OSPF Link State Request Packet.
LS update OSPF Link State Update Packet.
LS Ack OSPF Link State Acknowledge Packet.
Note: This command does not display in running config because it is a debug function. It must be
set manually every time the XSR is rebooted.