Enterasys Networks X-Pedition XSR CLI - Manual (Page 659)

Firewall Feature Set Commands
XSR CLI Reference Guide 16-115
Default
If the method‐name is not set, all methods and method attributes display.
Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following output is displayed by entering show aaa method :
XSR#show aaa method
AAA Method Stats:
Method Type: PKI
Default group name is: DEFAULT
Queue timeout is: 0
Registered Clients: VPN
Method Type: Local (Default Method)
Default group name is: acme
Queue timeout is: 5000
Registered Clients: VPN
Method Type: Radius, Method Name: def
This method is currently enabled
Backup Radius server name is: RADbackup
Default group name is: DEFAULT
IP Address is: 0.0.0.0
Hash is currently: enabled
Authentication and encryption key is: 3edue8jmdi
The UDP port for Authentication is: 1645
The UDP port for Accounting is: 1646
Maximum number of login attempts is: 4
Maximum number of retransmission tries is: 3
Attempt Timeout is: 10
Queue timeout is: 0
Registered Clients: Firewall
Firewall Feature Set Commands
ip firewall auth
This command defines the object which handles configuration for firewall authentication.
Syntax
ip firewall auth {timeout <60-1800> | port <1024-65535>}
timeout # Idle timeout for authentication cache entry, ranging from 60 to 1800 seconds.